## Enthalpy

The enthalpy of a reaction is a measure of how much heat is absorbed or given off when a chemical reaction takes place.  It is represented by ΔHreaction and is found by subtracting the enthalpy of the reactants from the enthalpy of the products:

ΔHreaction = ΣΔHf products - ΣΔHf reactants

The Greek letter Σ, may be new to you. In mathematics, it is used to represent the phrase "to sum." Therefore, this equation is telling us to sum the enthalpy of the products and subtract the sum of the enthalpy of the reactants.  Using a table of Standard Thermodynamic Values at 25°C, you may notice that the table, which covers many pages, has five columns.  The first column is the formula of an element or compound you are looking up.  The second column is its state of matter - which is very important.  The third column lists Hformation values, or the enthalpy of formation.  This is the amount of energy needed to form one mole of that compound.  Most values as you can see are negative because releasing energy (exothermic) is a more common process in nature.

Find sodium sulfide, or Na2S.  As you can see, its enthalpy of formation is  -373.21 kJ/mol.  This means that when one mole of sodium sulfide is formed from its constituent elements (sodium and sulfur), -373.21 kilojoules of energy is released.  Elements in their free state at their state of matter at 25°C (this is called the "standard state") are assigned a value of 0.0.  This is because elements are not formed from anything more basic, therefore no energy must be absorbed or released to create them.  When the enthalpy of reaction is calculated, a negative value indicates the reaction is exothermic.  A positive value indicates the reaction is endothermic.

## Entropy

The entropy change from a reaction, or Sreaction, is a measure of the dispersal of energy and matter that takes place during a reaction.  As far as identifying an increase in dispersal of matter, there are two things that indicate an increase in entropy:
• Have more total moles of products than total moles of reactants.
• Have products that are in states of matter that exhibit high amounts of freedom for their particles, namely gases and aqueous compounds.

The entropy of a reaction can be calculated using a formula similar to the enthalpy of reaction:
ΔSreaction = ΣΔSproducts - ΔΣSreactants

## Gibbs Free Energy

Gibbs Free Energy is a quantity used to measure the amount of available energy (to do work) that a chemical reaction provides.  Furthermore, it can be used to determine whether or not a reaction is spontaneous (works) at a given Kelvin temperature.  Reactions are very temperature dependent, and sometimes work significantly better at some temperatures than others.  The ΔGf° values provided in the table are only viable at 25°C (298.15 K). Similar to the equations for ΔHreaction and ΔSreaction, ΔGreaction is the difference between the sum of the free energy of formation values of the products and reactants:
ΔGreaction = ΣΔGf products - ΔΣGf reactants
A positive ΔGreaction indicates the reaction is nonspontaneous, a negative ΔGreaction indicates the reaction is spontaneous, and a value close to zero indicates an equilibrium. It's important to note that spontaneous does not necessarily mean fast. A spontaneous reaction is immediate, but like the rusting of metal, may be slow. Reaction rate is governed by other factors that are not related to the thermochemical quantities discussed here.

For all temperatures, including 25°C, the following equation can be used to determine spontaneity:
ΔGreaction = ΔHreaction - TΔSreaction
In order to use this equation properly, keep these thoughts in mind:
• The temperature must be Kelvin, which is done by adding 273.15 to the Celsius temperature.
• Sreaction must be converted to kJ/K.

The value calculated for ΔGreaction should be considered an approximate, particularly as the temperature moves further away from 25°C. Both ΔHreaction and ΔSreaction will vary with temperature. Although ΔSreaction tends to vary more, its impact on ΔGreaction tends to be less. This is because ΔSreaction is measured in units of J/K, and when converted to kJ/K (to agree with the units for ΔHreaction and ΔGreaction - kilojoules), it is numerically small. ΔHreaction tends to vary less than ΔSreaction, but because its value is usually several orders of magnitude greater than a kJ/K value for ΔSreaction, it affects ΔGreaction greatly. Nevertheless, there are some reactions for which the above equation can give a reliable value over a large temperature range.

## The Relationship between Spontaneity and the Sign of Enthalpy and Entropy Values

Consider the following relationships:
When ΔHreaction is negative and ΔSreaction is positive, ΔGreaction will be negative (favorable) over all temperatures.
When ΔHreaction is negative and ΔSreaction is negative, ΔGreaction will be negative (favorable) at high temperatures.
When ΔHreaction is positive and ΔSreaction is negative, ΔGreaction will not be negative (favorable) at any temperature.
When ΔHreaction is posttive and ΔSreaction is positive, ΔGreaction will be negative (favorable) at low temperatures.

## Graphing Free Energy as a Function

Upon inspection, the equation ΔGreaction = ΔHreaction - TΔSreaction can be proven to represent a linear function, where ΔGreaction is calculated over a series of temperatures while Hreaction and ΔSreaction remain constant.  Recall the equation y = mx + b represents a linear equation, where each variable corresponds to a variable in ΔGreaction = ΔHreaction - TΔSreaction.  Rewriting the free energy equation as ΔGreaction = - TΔSreaction + ΔHreaction makes it easier to see the parallel.  Despite the position of T, it is not the slope of the equation.  -ΔSreaction will represent m or the slope. This is because slope, like ΔSreaction, is a constant for a particular reaction. The negative sign in fron of ΔSreaction is a consequence of the -TΔSreaction term in the original equation. Since temperature cannot be negative, the sign is applied to ΔSreaction.Since x is allowed to fluctuate (as is the temperature) T corresponds to x.  This leaves ΔHreaction, which must correspond to b or the y-intercept of the equation.  This can be used for determining a range of temperatures for which a reaction will be spontaneous or not. As mentioned earlier, this will work over a small temperature range since ΔHreaction and ΔSreaction will change considerably over a large temperature range.

## Relationship Among ΔGreaction, K, and Ecell

ΔGreaction can be calculated using one of three equations:
ΔGreaction = ΔHreaction - TΔSreaction
ΔGreaction = -RTlnK
ΔGreaction = -nFEcell

These equations can be substituted for one another, and from that the following relationships can be ascertained:

If a reaction is spontaneous, then ΔGreaction is negative, K approaches infinity, and Ecell is positive.
If a reaction is nonspontaneous, then ΔGreaction is positive, K approaches zero, and Ecell is negative.
If a reaction is at equilibrium, then ΔGreaction is zero, K equals 1, and Ecell is zero.