Nhóm: 18 or VIII A
trọng lượng nguyên tử: 39.948
Giai đoạn: 3
Số CAS: 7440-37-1
Không có đồng vị ổn định
Chất rắn (Dự đoán)
Sự miêu tả • Sử dụng / Chức năng
Its presence in air wassuspected by Cavendish in 1785, discovered by Lord Rayleigh and Sir William Ramsay in 1894. The gas is prepared by fractionation of liquid air,the atmosphere containing 0.94% argon. The atmosphere of Mars contains 1.6% of 40Ar and 5 p.p.m. of 36Ar. Argon is two and one half times as solublein water as nitrogen, having about the same solubility as oxygen. It is recognized by the characteristic lines in the red end of the spectrum. It is usedin electric light bulbs and in fluorescent tubes at a pressure of about 400 Pa, and in filling photo tubes, glow tubes, etc. Argon is also used as an inertgas shield for arc welding and cutting, as a blanket for the production of titanium and other reactive elements, and as a protective atmosphere for growingsilicon and germanium crystals. Argon is colorless and odorless, both as a gas and liquid. It is available in high-purity form. Commercial argon isavailable at a cost of about 3¢ per cubic foot. Argon is considered to be a very inert gas and is not known to form true chemical compounds, as do krypton,xenon, and radon. However, it does form a hydrate having a dissociation pressure of 105 atm at 0°C. Ion molecules such as (ArKr)+, (ArXe)+, (NeAr)+have been observed spectroscopically. Argon also forms a clathrate with b-hydroquinone. This clathrate is stable and can be stored for a considerabletime, but a true chemical bond does not exist. Van der Waals’ forces act to hold the argon. Naturally occurring argon is a mixture of three isotopes.Seventeen other radioactive isotopes are now known to exist. Commercial argon is priced at about $70/300 cu. ft. or 8.5 cu. meters. 1
• "Both helium and argon are used in large amounts in noble-gas-shielded arc-welding processes. The noble gas protects the hot welded metal from oxidation by air...In addition to its use in arc-welding, argon is used in filling incandescent and fluorescent lamps. The presence of the noble gas in incandescent lamps retards the sublimation of the filament and thus both prolongs the life of the lamp and retards its blackening. In fluorescent lamps, argon serves as an ionizable gas for starting the lamp and for carrying the current during its operation." 2
• "Argon is often used in chemical laboratories to provide an inert atmosphere for the handling of substances that are reactive toward water, oxygen, or nitrogen." 3
• "inert atmosphere for welding...filling incandescent light bulbs" 4
• "In 1914, Langmuir...substituted argon, [in place of nitrogen] which was a little more expensive but which increased the lifetime of the bulbs more than enough to compensate for the additional cost. Electric light bulbs are routinely argon-filled now, so that the first important industrial use of the noble gases still retains its value.
The inertness of argon is its most important characteristic as far as uses are concerned. This is true in light bulbs, and it is true so far as argon's connection with welding is concerned.
In 1929...A jet of argon gas was pushed through the arc so that it constantly enveloped the area to be welded. Such shielded arc-welding produced excellent joints of full strength, not only in steel, but in other metals such as copper, nickel, magnesium, and so on. The most important single use of argon is in connection with shielded arc-welding nowadays.
Argon is also used on other occasions where it is important to keep oxygen and nitrogen away. For instance, aluminum can be cut by an "atomic hydrogen torch"...However, in the presence of air, the melting aluminum combines readily with oxygen, and the brittle oxide flakes away, so that the cut is ragged and irregular. For that reason, argon is added to the hydrogen. It doesn't affect the reunion of hydrogen atoms, but does serve to surround the melting aluminum with an inert atmosphere.
Argon is also used in the preparation of metallic titanium...Today titanium is prepared under an atmosphere of argon, and the resultant pure titanium is particularly tough and strong.
Tính chất vật lý
Độ nóng chảy:6* -189.35 °C = 83.8 K = -308.83 °F
Điểm sôi:6* -185.85 °C = 87.3 K = -302.53 °F
điểm thăng hoa:6
Điểm cốt lõi:6 -122.28 °C = 150.87 K = -188.104 °F 6
Tỉ trọng:7 1.633 g/L
* - at 1 atm
electron Cấu hình
electron Cấu hình: [Ne] 3s2 3p6
Cao nhất Chiếm Năng lượng Cấp: 3
Valence electron: 8
số lượng tử:
n = 3
ℓ = 1
mℓ = 1
ms = -½
electron Affinity:8 not stable eV
Quá trình oxy hóa Hoa: 0
|ion hóa tiềm năng||eV 9||kJ/mol|
|ion hóa tiềm năng||eV 9||kJ/mol|
|ion hóa tiềm năng||eV 9||kJ/mol|
nhiệt hóa học
Nhiệt dung riêng: 0.520 J/g°C 10 = 20.773 J/mol°C = 0.124 cal/g°C = 4.965 cal/mol°C
Nhiệt Fusion: 1.188 kJ/mol 12 = 29.7 J/g
Nhiệt bay hơi: 6.447 kJ/mol 13 = 161.4 J/g
|Nhà nước Matter||Entanpi của Formation (ΔHf°)14||entropy (S°)14||Gibbs miễn phí năng lượng (ΔGf°)14|
|Nuclide||Khối lượng 15||Half-Life 15||spin hạt nhân 15||Ràng buộc năng lượng|
|30Ar||30.02156(32)#||<20 ns||0+||208.50 MeV|
|31Ar||31.01212(22)#||14.4(6) ms||5/2(+#)||224.95 MeV|
|32Ar||31.9976380(19)||98(2) ms||0+||246.99 MeV|
|33Ar||32.9899257(5)||173.0(20) ms||1/2+||262.52 MeV|
|34Ar||33.9802712(4)||844.5(34) ms||0+||278.97 MeV|
|35Ar||34.9752576(8)||1.775(4) s||3/2+||291.70 MeV|
|36Ar||35.967545106(29)||ỔN ĐỊNH||0+||307.22 MeV|
|37Ar||36.96677632(22)||35.04(4) d||3/2+||316.23 MeV|
|38Ar||37.9627324(4)||ỔN ĐỊNH||0+||328.02 MeV|
|39Ar||38.964313(5)||269(3) a||7/2-||334.23 MeV|
|40Ar||39.9623831225(29)||ỔN ĐỊNH||0+||344.17 MeV|
|41Ar||40.9645006(4)||109.61(4) min||7/2-||350.38 MeV|
|42Ar||41.963046(6)||32.9(11) a||0+||359.38 MeV|
|43Ar||42.965636(6)||5.37(6) min||(5/2-)||365.59 MeV|
|44Ar||43.9649240(17)||11.87(5) min||0+||374.59 MeV|
|45Ar||44.9680400(6)||21.48(15) s||(1/2,3/2,5/2)-||378.93 MeV|
|46Ar||45.96809(4)||8.4(6) s||0+||387.01 MeV|
|47Ar||46.97219(11)||1.23(3) s||3/2-#||391.35 MeV|
|48Ar||47.97454(32)#||0.48(40) s||0+||397.56 MeV|
|49Ar||48.98052(54)#||170(50) ms||3/2-#||400.04 MeV|
|50Ar||49.98443(75)#||85(30) ms||0+||404.39 MeV|
|51Ar||50.99163(75)#||60# ms [>200 ns]||3/2-#||405.94 MeV|
|52Ar||51.99678(97)#||10# ms||0+||409.35 MeV|
|53Ar||53.00494(107)#||3# ms||(5/2-)#||409.97 MeV|
|Các giá trị được đánh dấu # được không hoàn toàn xuất phát từ số liệu thực nghiệm, nhưng ít nhất một phần từ các xu hướng có hệ thống. Quay với lập luận phân yếu được kèm theo trong ngoặc đơn. 15|
trái đất - nguồn hợp chất: uncombined 16
trái đất - Nước biển: 0.45 mg/L 17
trái đất - vỏ trái đất: 3.5 mg/kg = 0.00035% 17
trái đất - Tổng số: 2.20E-8 cm^3/g 18
Mercury (hành tinh) - Tổng số: 18
sao Kim - Tổng số: 210E-8 cm^3/g 18
chondrite - Tổng số: 0.4 (relative to 106 atoms of Si) 19
Thông tin an toàn
Bảng dữ liệu an toàn vật liệu - ACI Alloys, Inc.
Để biết thêm thông tin
Liện kết ngoại:
Chemical & Engineering News
HyperPhysics from Georgia State University's Department of Physics and Astronomy
Phòng thí nghiệm quốc gia Los Alamos
Physics Department of the University of Coimbra
(1) - Lide, David R. CRC Handbook of Chemistry and Physics, 83rd ed.; CRC Press: Boca Raton, FL, 2002; p 4:4.
(2) - Jolly, William L. The Chemistry of the Non-Metals; Prentice-Hall: Englewood Cliffs, New Jersey, 1966; p 23.
(3) - Jolly, William L. The Chemistry of the Non-Metals; Prentice-Hall: Englewood Cliffs, New Jersey, 1966; p 23.
(4) - Whitten, Kenneth W., Davis, Raymond E., and Peck, M. Larry. General Chemistry 6th ed.; Saunders College Publishing: Orlando, FL, 2000; p 944.
(5) - Asimov, Isaac. The Noble Gases; Basic Books, Inc.: New York City, 1966; pp 83-85.
(6) - Lide, David R. CRC Handbook of Chemistry and Physics, 83rd ed.; CRC Press: Boca Raton, FL, 2002; p 4:132.
(7) - Lide, David R. CRC Handbook of Chemistry and Physics, 84th ed.; CRC Press: Boca Raton, FL, 2002; p 4:39-4:96.
(8) - Lide, David R. CRC Handbook of Chemistry and Physics, 84th ed.; CRC Press: Boca Raton, FL, 2002; p 10:147-10:148.
(9) - Lide, David R. CRC Handbook of Chemistry and Physics, 83rd ed.; CRC Press: Boca Raton, FL, 2002; p 10:178 - 10:180.
(10) - Lide, David R. CRC Handbook of Chemistry and Physics, 83rd ed.; CRC Press: Boca Raton, FL, 2002; p 4:133.
(11) - Lide, David R. CRC Handbook of Chemistry and Physics, 83rd ed.; CRC Press: Boca Raton, FL, 2002; pp 6:193, 12:219-220.
(12) - Lide, David R. CRC Handbook of Chemistry and Physics, 83rd ed.; CRC Press: Boca Raton, FL, 2002; pp 6:123-6:137.
(13) - Lide, David R. CRC Handbook of Chemistry and Physics, 83rd ed.; CRC Press: Boca Raton, FL, 2002; pp 6:107-6:122.
(14) - Dean, John A. Lange's Handbook of Chemistry, 12th ed.; McGraw-Hill Book Company: New York, NY, 1979; p 9:4-9:94.
(15) - Atomic Mass Data Center. http://amdc.in2p3.fr/web/nubase_en.html (accessed July 14, 2009).
(16) - Silberberg, Martin S. Chemistry: The Molecular Nature of Matter and Change, 4th ed.; McGraw-Hill Higher Education: Boston, MA, 2006, p 965.
(17) - Lide, David R. CRC Handbook of Chemistry and Physics, 83rd ed.; CRC Press: Boca Raton, FL, 2002; p 14:17.
(18) - Morgan, John W. and Anders, Edward, Proc. Natl. Acad. Sci. USA 77, 6973-6977 (1980)
(19) - Brownlow, Arthur. Geochemistry; Prentice-Hall, Inc.: Englewood Cliffs, NJ, 1979, pp 15-16.